Fire Door Surveys

Fire Door Surveys

Fire Door Safety Checks - Contact Veteran Fire Safety Ltd -


Check for certification 

Is there a label or plug on top (or occasionally on the side) of the door to show it is a certificated fire door? If there is, that’s good news, otherwise report it to whoever is in charge of your building.


Check the gaps

Make sure you check the gaps around the top and sides of the fire door are that they are consistently less than 4mm when closed. The gap under the door can be slightly larger (up to 8mm is not uncommon), but it does depend on the door. As a rule of thumb, if you can see light under the door, the gap is likely to be too big. It is good news if the door fits the frame and it’s not damaged. If not make sure you report it. If the gaps are too big smoke and fire will travel through the cracks.


Check the seals

Are there any intumescent seals around the door or frame, and are they intact with no sign of damage? These seals are usually vital to the fire door's performance, expanding if in contact with heat to ensure fire (and in some cases smoke) can’t move through the cracks. If not, report it - the door may not be properly maintained and in the intensity of a fire may not protect you long enough.


Check the hinges

Are the hinges firmly fixed (make sure that there are three or more of them) and with no missing or broken screws? If you see problems, make sure you report it - the door is obviously not properly maintained and in the intensity of a fire the door will not perform and hold back the fire for long enough.


Check the door closes properly

Does the door close firmly onto the latch without sticking on the floor or the frame? If not make sure you report it. A fire door will only work when it’s closed. A fire door is completely useless if it’s wedged open or can’t close fully.